Portable automatic liquid transfer device

Remove the cooling liquid from the cooling tank corruption case, extract oil from large oil cans, or remove the liquid from some containers, these operations are people very headache. Cheap vacuum pump, large noise, not thorough, not suitable for factory operations, can not achieve satisfactory results. At present, our company can provide a good solution to solve these problems, especially to remove the coolant from the tank. The utility model has the advantages of small size and portable type, and the utility model can conveniently and quickly absorb the waste oil, the waste cooling liquid and other mechanical oil. The device only needs to rotate the handle, and the liquid can be sucked out of the barrel into the specified container.

Automatic liquid transport products have been in the United States, Europe, Japan and other countries, a large number of features, is convenient, safe, fast.

The product in the use of standard pressure of 80 PSI compressed air, can be filled or emptied within 2 minutes / 55 gallons (210 liters) of the barrel; only by rotating the top of the dial, can change the vacuum mode (row) and loading mode (suction).

Application occasions
Cooling fluid
Various oils
Overflow liquid
The mud or debris
Waste water

Characteristic：
Larger capacity, trough bottom easier to clean
Avoid hand contact with toxic substances
No need to use adsorbent to dry ground
Will not be used as an electric vacuum pump after a period of time to reduce efficiency
Made of stainless steel Anti overflow valve for preventing over loading

The use of compressed air connection, not connected to the power supply, safe in the wet area
Low noise, no special maintenance

Specifications：
Operating pressure: 80 PSI
Noise level: 78 dBA
Vacuum suction: 8.5 HG @ 80 PSI
Absorbent gallons / min: 33 GPM
Material range: water - wet sludge
Throat diameter: 1.5"
Compressed air consumption: 28 CFM @ @ psi 80